Hyperbaric Chamber Model 3200 Monoplace

Hyperbaric Chamber Model 3200 MonoplaceHyperbaric Chamber Model 3200 Monoplace

 

 

3200


Hyperbaric Chamber - Model 3200 Monoplace

Tekna Hybrid 3200 Monoplace HBOT System

The Hybrid 3200 is a very unique oxygen modality monoplace chamber.

It is ASME, PVHO-1, National Board, FDA 510(k) cleared, and meets or exceeds NFPA-99-2012 Chapter 14 requirements.

Since we designed it in 1998 the Hybrid 3200 has been copied by at least four different companies in other parts of the world.

Acrylic tube replacement costs for the Hybrid 3200 are much less than conventional all- acrylic chambers due to the half acrylic and half American made steel pressure vessel.

The thick acrylic tubes used in constructing HBOT systems are excellent insulators.
Because the Hybrid 3200 is half acrylic and half steel patient comfort is increased due to the greater metal mass for heat rejection and thus a much cooler patient.

Additionally the Hybrid 3200 is the only monoplace chamber on the market with a .375” firewall between the patient and any potential source of fire or flames emanating from the oxygen components under the chamber.

No other monoplace chamber on the market has a firewall.

Finally, the Hybrid 3200 is the only monoplace HBOT system that can be disassembled into three separate components. These three major components can be individually placed in a small freight elevator and re-assembled on an upper floor or basement.

We have dozens of Hybrid 3200’s in places where other chamber systems could not possibly be utilized.

American made steel and the most reliable “off the shelf” components add up to an extremely reliable, and safe, oxygen modality monoplace HBOT system that assures the availability of spare parts well into the 21st Century.

 

Oxygen Modality

  • 32” Inside Diameter
  • 3 ATA Operating Pressure
  • 21st Century Design
  • ASME Section VIII
  • PVHO-1 (latest addenda)
  • National Board Registered
  • NFPA 99 Compliant
  • Pressurized With Oxygen
  • Canadian Medical Device Class III
  • TSSA & CRN Compliant
  • Lowest Acrylic Replacement Costs
  • Deluxe Powder Coated Console
  • Communications System w/Battery/Float Charger
  • Digital Temperature & Countdown Timer
  • Tamper-proof Cycle Counter
  • IV & TCOM Ports Standard

Delivered and Installed in the Continental USA

 Lease Purchase Options Available

Hybrid 3200 Options

  • Air Break Mask

Hyperbaric Chamber Model 3200 Monoplace

  • Monoplace Hyperbaric Chamber

    Monoplace Hyperbaric Chamber

    Hyperbaric Chamber Model 3200 Monoplace

Call Today for more information!

813-997-0787